This kit can be used to connect Three Phase motors your 220-240V Single Phase mains supply safely, and includes all the materials you need to connect your Corvus Grinder to the mains, while being able to control the speed. It is supplied with a UK 3-Pin Plug, but you can fit this kit with your local plug too.
Want to learn more about VFDs and speed control for belt grinders?
This kit features the ultimate belt grinder VFD. Made in the EU, the VFD attaches directly to the motor. It is IP67 protected, and the integrated heatsink in the VFD casing is cleverly designed to make use of the motor’s fan. The speed and direction can be controlled directly from the motor, but as standard, we include an external control set, which gives you a physical directional switch, physical dial to control speed, as well as an emergency stop button, it also includes everything you need to mount those controls in the ideal position on your Corvus Grinder.
The Kit contains:
Sanyu 1.5Kw IP67 VFD
2M Rubberised Cable to connect VFD to plug
UK Tough 13A 3-Pin Plug
Pre-Punched Mounting Box
22mm 1K Potentiometer, manual speed dial
22mm 3-Position Switch, directional control
22mm Emergency Stop button
Cable Gland
5-Core Data Cable, for control box to VFD
Crimping Terminals
Mounting Hardware
You will have to strip and crimp the cables using the provided terminals, punch out the holes in the box, and carry out the wiring according to your local wiring requirements. Note that the control box uses only low-voltage signal currents. To make this easier, I will include the relevant standards and specifications below:
CE- Certified Switches and Box, IP67 Rated
Rubberised cable is 1.5mm2 and made to BS EN 50525-2-21 specifications
Data cable to 3185Y specifications
Cable Glands are CE Marked and IP67 Rated
This kit can be used to connect Three Phase motors your 220-240V Single Phase mains supply safely, and includes all the materials you need to connect your Corvus Grinder to the mains, while being able to control the speed. It is supplied with a UK 3-Pin Plug, but you can fit this kit with your local plug too.
Want to learn more about VFDs and speed control for belt grinders?
This kit features the ultimate belt grinder VFD. Made in the EU, the VFD attaches directly to the motor. It is IP67 protected, and the integrated heatsink in the VFD casing is cleverly designed to make use of the motor’s fan. The speed and direction can be controlled directly from the motor, but as standard, we include an external control set, which gives you a physical directional switch, physical dial to control speed, as well as an emergency stop button, it also includes everything you need to mount those controls in the ideal position on your Corvus Grinder.
The Kit contains:
Sanyu 1.5Kw IP67 VFD
2M Rubberised Cable to connect VFD to plug
UK Tough 13A 3-Pin Plug
Pre-Punched Mounting Box
22mm 1K Potentiometer, manual speed dial
22mm 3-Position Switch, directional control
22mm Emergency Stop button
Cable Gland
5-Core Data Cable, for control box to VFD
Crimping Terminals
Mounting Hardware
You will have to strip and crimp the cables using the provided terminals, punch out the holes in the box, and carry out the wiring according to your local wiring requirements. Note that the control box uses only low-voltage signal currents. To make this easier, I will include the relevant standards and specifications below:
CE- Certified Switches and Box, IP67 Rated
Rubberised cable is 1.5mm2 and made to BS EN 50525-2-21 specifications
Data cable to 3185Y specifications
Cable Glands are CE Marked and IP67 Rated
